Peanut Dispenser

Works with an RDS3115 continuous rotation servo motor and a reed switch for the spout.
arduino nano
4 nuts and 4 M3 countersunk screws, 5 cm long.
2 nuts and M4 countersunk screws, 2.5 cm long.
6 mm M6 threaded rod and M10 nuts.
The ball screw should be printed as horizontally as possible for increased breakage resistance.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/41bGoEDjUQR