Charlie (Smiling Friends) 3MF Fridge Magnet

Charlie from Smiling Friends! I included the 3mf for multicolor, or you can import the .STLs yourself. I used these round 3x1mm magnets, but really any you can glue onto the back of them. https://a.co/d/5ddhSyl

The STLs are all to scale with each other, but will need to be resized for your print.
For the size I arbitrarily chose these measurements.
X: 50.85 mm
Y: 75 mm
Z: 1.50 mm
charlie1.stl (Bottom) I made .7 mm for Z so it was thinner, and then dropped the layer so it was on the bottom.

Here are the colors I used from Top to Bottom:

charlie2.stl - Yellow
charlie4.stl - White
charlie5.stl - Gray
charlie6.stl - Orange
charlie8.stl - Red
charlie7.stl - Brown
charlie2.stl - Black
charlie1.stl - Black

Double check the print preview. Some designs I have to paint on a layer of color. Let me know if you have questions. I'm still new to Multi-color and making my own models!