Hat Kid (A Hat in Time) 3MF Magnet

Hat Kid from A Hat in Time! I included the 3mf for multicolor, or you can import the .STLs yourself. I used these round 3x1mm magnets, but really any you can glue onto the back of them. https://a.co/d/5ddhSyl

The STLs are all to scale with each other, but will need to be resized for your print.
For the size I arbitrarily chose these measurements.
X: 64.52 mm
Y: 70.01 mm
Z: 1.50 mm
Hatk-11.stl (Bottom) I made .7 mm for Z so it was thinner, and then dropped the layer so it was on the bottom.

NOTE ABOUT EYES. I changed the eyes to purple because my Cyan was too similar with the white from her eyes. Technically in game it looks like her eyes are closest to Cyan ALSO: I painted the mouth (Tongue) red with the Color Painting feature in the Anycubic Next slicer.. I don't know why I did it like that.

Here are the colors I used from Top to Bottom:

hatk.stl - Purple
hatk-10.stl - Purple
hatk-8.stl - Brown
hatk-7.stl - Brown
hatk-6.stl - White
hatk-5.stl - Beige
hatk-4.stl - White
hatk-3.stl - Cyan
hatk-2.stl - Yellow
hatk-9.stl - Black
hatk-11.stl - Black

Double check the print preview. Some designs I have to paint on a layer of color. Let me know if you have questions. I'm still new to Multi-color and making my own models!