Courage (Courage the Cowardly Dog) 3MF Magnet

Courage from Courage the Cowardly Dog! I included the 3mf for multicolor, or you can import the .STLs yourself. I used these round 3x1mm magnets, but really any you can glue onto the back of them. https://a.co/d/5ddhSyl

The STLs are all to scale with each other, but will need to be resized for your print.
For the size I arbitrarily chose these measurements.
X: 64.46 mm
Y: 75 mm
Z: 1.50 mm
Courage1.stl (Bottom) I made .7 mm for Z so it was thinner, and then dropped the layer so it was on the bottom.

If you are reading this when this was published I am still slowly uploading designs I made a while ago. I had 50 or so ideas I made, and then later decided to post. Let me know if you have any designs I have not made yet! My only restriction is I can do at most 8 colors.. For now

Here are the colors I used from Top to Bottom:

Courage3.stl - Pink
Courage4.stl - White
Courage5.stl - Brown
Courage6.stl - Beige
Courage7.stl - Red
Courage2.stl - Black
Courage1.stl - Black
Double check the print preview. Some designs I have to paint on a layer of color. Let me know if you have questions. I'm still new to Multi-color and making my own models!