Custom Cisco 7821 Phone Hook

This is a custom phone hook I designed for the Cisco 7821 VOIP phone. This is not the original design, but could be used more for phones that that a bit more damage and missing pieces. I made it deeper and wider than the original.

The original hook can be found by other designers online and is roughly 17mm x 5.7 mm x 4.2 mm). If you would like something like the original, try this: https://www.thingiverse.com/thing:7003424

My custom version is larger than the original hole, so you may need to use a file and shave off a little on the sides to get it to fit.
I've uploaded two different versions of my clip:
Version A has the "7821" text engraved and it measures 20mm x 8.09mm x 4.44mm.
Version B has no text, it measures 17mm x 7.95mm x 4.4mm.

It took me 27 trial and error prints to finally get to these two versions, so I hope it helps you! I used Blender to design the hook. Good luck. See my other phone hook for the 6921 Cisco VOIP phone.
The phone can cost anywhere between 30-50 bucks, so printing the clip can save you $$$$$.