Loxone / Waveshare 4 Zoll Display Schalter / Ständer

Loxone Touch Panel Enclosure - Orange Pi Zero 3 & Waveshare 4" HDMI Version 720x720 px
Transform your Loxone Smart Home control with these custom-designed 3D-printable housings. These enclosures are specifically designed to run the Loxone Android/Linux App on an Orange Pi Zero 3 (1GB) paired with a Waveshare 4-inch Touch LCD.

Whether you want a permanent wall-mounted switch replacement or a sleek desktop controller, this project provides the housing you need.

Features
Dual Design Options: Includes files for a Wall-Mounted version (compatible with standard 1-gang or 2-gang switch layouts) and a Desktop Stand version.

Modular Construction: The wall version allows for side-by-side integration with standard physical switches/buttons.

Perfect Fit: Dedicated for the Orange Pi Zero 3 ports, including power

Hardware Requirements
To complete this build, you will need:

SBC: Orange Pi Zero 3 (1GB RAM version recommended).

Display: Waveshare 4-inch Touch LCD 720x 720 (HDMI interface).

Software: DietPi and Loxone Linux App installed (or running via a kiosk-mode app).

Power: 5V USB-C power supply 3 Amp !

Versions Included

1. Wall-Mount Enclosure (Surface Mount)
   Designed to replace or augment your wall switches.

Single (1-way): Compact housing just for the screen.

Double (2-way): Extended housing that holds the 4" Touch Panel on one side and leaves space for a standard physical switch/button/ Sensor 86x86 standard

1. Desktop Stand
   A sleek, angled wedge design perfect for nightstands, office desks, or kitchen counters. It provides an ergonomic viewing angle for quick access to your Loxone "Favorites" and "Categories."

Print Settings
Printer: Any FDM Printer

Material: PLA, PETG, or ABS (PETG recommended for wall mounts to ensure durability).

Resolution: 0.16mm better 0.12 mm

Infill: 15-20% (Rectilinear or Gyroid) better 30%

Supports: Minimal supports may be needed for the port cutouts depending on your printer's bridging capabilities. use standard seamless support on Bambulabs

Assembly Instructions
Mount the Orange Pi Zero 3 into the base of the housing using the provided mounting posts.

Connect the Waveshare 4" Display via HDMI bridge. (HDMI to HDMI Mini)

Route your power cable through the rear or side cutouts.

Snap or screw the faceplate into place (depending on the specific file version used).