Thicker Dalek parts for FDM printing (20% scale)

Remixed from https://www.thingiverse.com/thing:7066193

I couldn't get the originals of these 3 parts to print using FDM as they were just too small / fine detail. So I modified these versions to be thicker / sturdier for printing and combined the 3 "plunger" poles into 1.

Parts are scaled to 20% of original size as that's how I was printing them. Just scale them back up accordingly if you need to.

I recommend you use your slicer to cut both the gun and pole in half horizontally and gluing the 2 halves together afterwards.
Rotate the gun by 22.5 degrees before cutting in half to ensure you don't cut through one of the outer wires (cut should go between the wires for best results).