Stun counter for Magic the Gathering

For keeping those pesky beat-sticks tapped down. I wasn't wild about the existing designs I found around the web and wanted something that more closely resembled the official stun icon, so I designed an icon in Inkscape and modeled this 2cm diameter counter for myself. As shown, it is easy to print in 2 colors--just add a stop after 1.4mm height--but likely looks good in a single color too!

I've included stl, step, and obj files for printing along with the FCstd file for modifying in FreeCAD, a 3mf file for using my print settings (also listed below), and the svg I designed in case you'd find use for it elsewhere.

Shown in the image are about 10 counters printed on my Bambu Lab A1 Mini with a 0.2mm nozzle using their Matte Marine Blue PLA and Matte Ivory White PLA, on a SuperTack plate. I'm quite happy with how they turned out, and would likely use the same settings again if I wanted to print more.

• Base settings template: 0.10mm Standard @BBLA1M 0.2 nozzle
• Quality:
  • Wall generator: Arachne
  • Order of walls: inner wall/outer wall/inner wall
• Strength:
  • Wall loops: 5
  • Top surface pattern: Concentric
  • Bottom surface pattern: Concentric

Backdrop for all photos is the Go To Sleep Citizen playmat designed by J3Concepts.