Double peristaltic pump smart drink pourer

I really liked the smart single pourer from @Lambcook (https://www.thingiverse.com/thing:3757822) and I wanted a double for my other choice - Red Bull & Vodka! Here it is in all its glory.

You'll need:
1 ewelink smart relay: https://a.co/d/6K7NwcD
2 peristaltic pumps: https://a.co/d/iNU3fgR
Silicone tubing (3mm ID x 5 mm OD): https://a.co/d/5D3eebI
6x6x7 momentary push button: https://a.co/d/5qEuqfz
1x Power supply with barrel jack: https://a.co/d/8lMTmMR
4x 3 mm x 8mm bolts for holding the relay down and keeping the cover secured
3x 2.5 mm x 6 mm bolts for holding the button cover on

Orientation is NOT correct for printing! You'll have to reorient them
Print with your normal settings and if your printer is set up well you won't need supports for anything except the pour spout. Be careful not to get supports into the opening of the pour spout or they're a pain to get out so the tubing will go through.

I find it easiest to get the tubing close to the correct length for the Red Bull and vodka then leave extra to pull through the pour spout, the tubing I linked is plenty long enough for there to be lots of extra. I've had the best luck in assembly by putting it all together except the pour spout, putting a piece of string through the pour spout, taping that to the tubing, and pulling the string while sliding the pour spout into place. YMMV.

Set up the relay wifi in the eWelink app according to their instructions, then use the inching to set your time for the perfect pour. Your time will vary depending on the length of tube you end up using. There's also a file included that will snap over the top of a 20oz Red Bull can to hold the tubing in place and keep stuff from getting in your can.

Enjoy and don't hesitate to reach out if you need anything!