Summary

Tri-level house in N Scale for the layout

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 V3 SE</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.04 nozzle</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>

Post-Printing

N Scale Tri-level house

            <div><p>Assembly Instruction:</p><ol><li>Install windows and doors</li><li>Glue the longest back wall to the base making sure the end is flush with the end of the base.</li><li>Glue the tall side wall with the 4 windows to the base and to the long wall. NOTE: The wider space below the windows should be down on the base.</li><li>Glue the short front entrance to the base and the tall 4 window piece</li><li>Install the Inner tall wall to the groove on the base forming a square for the upper Tri Level.</li><li>Install the shorter wall with the door on the base creating a smaller inner square,</li><li>Install the garage wall to the base with the extended arm to form the garage and overhead beam.</li><li>In stall the short roof on the Upper Tri-level and the long roof over the garage and rest of the house.</li><li>Install the garage door in either an open or closed position.</li></ol></div>

How I Designed This

Tri Level House

            <div><p>I used Regular PLA at 20% on all parts.<br>No supports needed on any part.  They all print flat<br>Although I didn't, I would use a brim or raft on the roof sections to help prevent warping. My roofs did just a little bit. I straighten them out with a heat gun.</p></div>

N Scale Tri Level House