GPi D-Pad Mod

This is a mod for the GPi Case series from retroflag. I love the handheld, I hate the D-Pad. I also strongly dislike the versions of D-Pad mods I have seen and tried for myself. This particular mod requires ZERO supports. After MANY iterations, this is one of the best versions I have come up with. Although I am actively still working on this mod, I have decided to release this mod for anyone that may want it.

Assembly is pretty straight forward. You don't need to use glue but, I would recommend it for structural stability. You can simply assemble it with a short piece of filament. You do not need to use any glue but again, I'd recommend it.

I wanted this design to be easy to print and that's why I designed it in this way.

There is also an optional "Pin Joint". This part isn't exactly necessary nor is it exactly easy to print. The parts that are necessary are the Base and the Cross.

If you have any suggestions, they are welcome. Remixes are welcome as well.

I know Raspberry Pi computers have been on the decline recently but, I love this stuff and I love making things. This is my first Thing I have made and I plan to make more. I hope this works for you.

You can print this with PLA but, I sorta changed direction with my design and how I printed it.

I ended up using PET-G because I wanted this to withstand the test of time.