Mini Boxer Man - Mechanical Gear Toy

This is a small fidget toy that lets you have the satisfaction of boxing, but not get tired or need the equipment! This print doesn't take too much time and can be printed in PLA and PETG (For mine, I used PLA). This project also has an updated stl. file that has no objects on the print bed levitating.

Please click the like button to support this project! Thanks.
If you like fidgets, look at my new Jellyfish Fidget that is under my account!

How to assemble:

First Step: Place bottom plate down (with the hanger to the left) and add the big gear with the handle on it on the far right slot. Place the small gear in the middle. And place the final big gear on the left slot.

Second Step: Place the top cover on the gears and make sure the sliding hole lines up with the handle. These should click together.

Third Step: Glue the chain to the boxing bag and the other side to the hanger.

Fourth Step: Slide the boxer onto the gear (make sure that when you slide it on, the handle should be in the middle of the slider. If not, you will not be able to turn 180 degrees)

What to Glue: Only glue the chain to the boxing bag and the hanger. If the boxing guy is too loose on the gear, you can add glue. Otherwise, nothing else should require glue.

Troubleshooting:
If some of the parts do not snap together, you can do 2 things. If it is too loose, you can glue them together (hot glue works great). If it is too tight, you can reprint it but with more offset distance. REMEMBER TO DROP THE FILE WHEN PRINTING!! If you have any questions, feel free to comment!

Thanks!
If you enjoyed this project, then please like it!