Ryobi 18V battery charger wall mount / holder (minimalistic)

A minimalistic, filament-efficient wall mount for this particular model of Ryobi 18V battery charger. It's a nice snug fit so you can put your battery in / take it out without it shifting around.
Printed in ASA (also can use ABS / PETG), 3 walls, 15% infill and sets you back about 50g including supports. Suggested orientation is as per the photo, using tree supports with a 0.225 offset so they fall right off and any artefacts will be hidden by the charger.
Requires 2x screws and wall plugs if going into brick.

There's another design out there too - it's bigger, arguably nicer looking, but obviously uses a lot more filament, so take your pick.