Case for RAK Wisblock 1 Watt starter kit 19007 - 13302

Made as a portable case for the RAK Wisblock 1 Watt starter kit.

This case will accommodate a Very large battery 10000mah or 15000mah (60mm x 110mm x 10mm+).
This design incorporates a standard 128x64 OLED screen, standard mini toggle for power, an Omron style limit switch for user button, and two SMA antenna holes.

Mountpoints provided for RAK 19007 Baseboard, GPS antenna, and extension RAK 13302 1 watt transceiver.

Can also be used without the RAK 13302 1 W board as a very large capacity portable node.

12x60x110 is what I used for the battery. I mentioned 10mm thick battery because it's both more common and allows for mounting options like thick VMB tape + weird wiring or wireless charging.

4x Case screws should be minimum 2mm x 15mm and up to 2mm x 20mm.
6x Board mounting screws should be 2mm x 5mm long.
4x Screen mounting screws should be very short 2mm x 3mm or less.
2x Microswitch screws should be 2mm x 8mm.

BOM
2mm screws of your choice for assembly:
https://www.amazon.com/woshilaoDS-Electronics-Replacement-Computer-Assortment/dp/B0D8PS1X3D/ref=sr_1_3?crid=Z9ZFS12J7LKT&s=electronics&sprefix=2mm%2Bscrew%2Bassortmen%2Celectronics%2C180&sr=1-3&th=1

User button:
https://www.amazon.com/dp/B0BG4YBYJ4

Power switch:
https://www.amazon.com/dp/B09J4BVDMR

Screen:
https://www.amazon.com/dp/B00O2LLT30?th=1

MagSafe Stick-on Ring:
https://www.amazon.com/dp/B0CPT9VQ7Q

April 8 2026 Updated: N-Type Lora antenna mount front half now included. MagSafe Back option now included.

April 11 2026 Updated: Fitment of Type-N components per comments.