WAGR Gangers Shed (S Scale)

WAGR Gangers Shed
Based on Gray Grays original kit for a Standard Gangers Shed of the Western Australian Government Railways.

This is modeled for S scale (The WAGR was a narrow gauge state wide railway and is modeled in WA using HO/00 mechs to run on 16.5mm Track on a 1:64th scale also known as Sn3 1/2 or Sn3.5 Scale as the narrow gauge in WA is generally 3'6" or 1067mm)

Prototype examples: while there are of course many variants this is just a small standard size, but they vary in construction and sometimes materials, for the storage of track maintenance equipment.

Printing, Kit - highly recommend FDM 0.2mm, 0.15 layers nozzle printing in ASA, but 0.4mm should still give good results, Some bridging is required for the roof.
Resin would be even nicer, but brittle.

Assembly: Gary's notes on assembly are reproduced in the pdf attached as written and as somewhat a memorial. The 3d Print will need to be assembled in a slightly different way as the technology is different but should be fairly self evident.

All respect is shown to the late Gary's work; whom was a lovely and generous man and is fondly remembered in developing his Urethane Resin Kits being one of the pioneers in developing kits for the members of the S scale SIG AMRA (WA).
This has been published free here based on the presumption the kits will be otherwise no longer available.