WAGR Small "Out of" Shed (S Scale)

WAGR "Out of" Shed
Modelled of WAGR Plans of the standard WAGR "Out of" Shed and the Portable WAGR "Out of" Shed of the Western Australian Government Railways.

The multiple variants can be printed from the attached files, with window or without either side, and with a finished door or the barge board door. depending on preference or prototype station.

Prototype examples: while there are of course many variants this is just a small standard size, but they vary in construction and sometimes materials, for the storage of Railway administration of very small station halts, good sheds, and some were used as ladies waiting rooms.

This is modeled for S scale (The WAGR was a narrow gauge state wide railway and is modeled in WA using HO/00 mechs to run on 16.5mm Track on a 1:64th scale also known as Sn3 1/2 or Sn3.5 Scale as the narrow gauge in WA is generally 3'6" or 1067mm)

Printing, Kit - highly recommend FDM 0.2mm, 0.15 layers nozzle printing in ASA, but 0.4mm should still give good results. Resin would be even nicer, but brittle.

Assembly is fairly self explanatory, note to not print more than 2 sides and one front and one rear part, there is a variant of each.