eCMP HV dummy cap and BMS isolating spacers

Hi, if you need a cap for the not used HV-Connector on a eCMP Van pack this is your thing. See https://github.com/dalathegreat/Battery-Emulator or join the community server. My old Anycubic i3 Mega made tight tolerances, it fits without glue or something.

The round spacers will isolate the BMS from the mounting bracket. Only the solar inverter will do isolation testing, since you can´t have two instances checking it. Instead of breaking or cutting off the tabs i choose to lift the BMS, put cardboard under the BMS, attach a magnet and drill the Holes from 6mm to 10mm. You have to make sure no metal flakes are floating in the case.

To bridge the High-Voltage-Inter-Lock (HVIL) permanent, just add a wago 221 to the two wires.