Armatus warhammer-style tank

Armatus is a battle tank inspired by the Leman Russ with a single main cannon and 3 pieces of secondary armament. It has a crew of 5, mass of about 50t and is ment to be used mainly by the Astra Militarum.

Assembly:
To make the model you will need one of each file with the exception of secondary armmament (up to 3 of each depending on your preference), 'tracks connected' (2x) and 'connectors' (2x). To assemble the hull glue pieces 'hull front' and 'hull back' together, than glue 'connectors', two on each side in the rectangular holes (the curved one goes into the front hole). Next put pieces 'sponsons v2' in the sponson holes on pieces 'side l' and 'side r' without gluing, so they can move. Next glue the sides to the hull. To assemble the tracks you need 2x 'tracks connected' and 'tracks' . To make one track I recomend starting from the longest connected track piece (17 links) , wich goes on the bottom. Than glue the 5 link connected segment to the bottom front section of the track (from 1st roadwheel to idler wheel), than glue 3 individual track segments to the idler wheel to continue the curve. Next glue a 4 link connected segment to the front upper section (idler to return roller), than glue the 16 link segment to the top (on return rollers). Lastly glue on the 7 link connected segment on the back upper side (return roller to sprocket), than glue 3 individual track segments together and then glue them on the back bottom side (roadwheel to sprocket). To finish the track glue about 4 track links on the sprocket to close the track. Make the other track the exact same way. All the secondary armament should friction fit in it's place, if not, try to chip off some plastic to loosen the connection. Insert any main gun into the turret by pushing its backside into the turret mantlet from below and then turning it horisontally.