Wall mount for "TCL LinkHub HH132" router

My "TCL LinkHub HH132" router was delivered without a wall mount.
So, I created my own.

It is simple and easy to print.
No supports required.

I printed mine with white PLA, 0.4 mm nozzle, 31% infill.
Almost any resolution and material (except TPU) should be ok.

Optional:
After printing, I glued 70 x 82 mm white 0.6 mm fleece (e.g. from packaging) into the channel for the router, to provide a tight but still soft seat for the device.

If you do not want to add fleece, you could reduce the width of the channel for the router by 1 mm.
The FreeCAD file is available in the download area. See Körper -> Pad -> Sketch: 26,4 mm

"LinkHub HH132" is probably a trademark of TCL. I am not a lawyer and thus I am not familiar with the legal stuff, that might have to be written here. You can find a description of this device here: https://www.tcl.com/global/en/routers/tcl-linkhub-hh132
If you feel, that additional text is legally required, please inform me and I will add it instantly.
I am not affiliated with this company in any way, just the owner of such a device.