Satermato warhammer-style tank

Satermato is a 80t heavy tank made to break through enemy defenses and destroy fortifications. It features very strong frontal armor, a single piece of heavy armament in the front, two sponsons, a main cannon and a coaxial machine gun. It's operated by a crew of 5 to 6.

Assembly:
To make the model you will need one of each file with the exception of 'track v3' (2x). To assemble the hull glue pieces 'front' and 'back' together, than glue 'connectors', two on each side in the rectangular holes. Next put pieces 'sponsons v4' in the sponson holes on pieces 'side l' and 'side r' without gluing, so they can move. Next glue the sides to the hull. To assemble the tracks you will need 2x 'track v3' . To make one track I recomend starting from the second longest connected track piece (12 links), wich goes under the fender on the top of the side, try to slide it in from the back. Next glue the same 12 link segment to the front top side (on front return rollers), try to slide it in under the front fender from the front so it touches the previous piece, than glue 3 individual track segments to the idler wheel. Next glue a 5 link connected track segment to the bottom front side (idler wheel to first roadwheel), than glue one individual track segment to the first roadwheel. Next glue the longest connected track segment (16 links) to the bottom (on roadwheels), than glue a 5 link connected segment to the bottom back side (roadwheel to sprocket). Next glue a 4 link connected track segment to the top back side (top return rollers to sprocket), lastly glue 3 individual track links to the sprocket to close the track. All the secondary armament should friction fit in it's place, if not, try to chip off some plastic to loosen the connection. Insert any main gun into the turret by pushing its backside into the turret mantlet from below and then turning it horisontally.