Summary

An acrylic and neoprene case for Makey Makey. Lasercut or 3d printed. Designed to be picked up and held.

Open source. CC-BY-SA.

Instructions

You will need the following purchased parts:

5 each:
M3 x 16 mm Screws
M3 Nuts
M3 Lock nuts
O rings (optional or print with NinjaFlex)

Print or laser cut your front plate and back plate. Print (ninjaflex) or cut (neoprene) your gaskets. Print (ninjaflex) or purchase O-rings.

Add O-Rings to Makey Makey. Assemble front plate, gaskets, Makey Makey, and back plate.

Use the M3 screws as intended and tighten nuts.

Enjoy.