Carrom Game Pieces

I got the carrom game pieces dimensions from the INTERNATIONAL CARROM FEDERATION PDF.
I printed the Men with 4 walls and kept adding infill until the slicer showed I was using 5.43 grams of filament. Then I used the clone feature to get the 19 pieces I needed. 9 White, 9 Black and 1 red. I did the same with the Striker. I was able to get it up to a little over 14 grams at 100% infill and 4 walls. I used PETG for all my pieces.

The Carrommen used in play shall be of good quality wood and circular in shape. The diameter of a Carromman shall
not be more than 3.18cm and not less than 3.02 cm. A Carromman shall be of not less than 0.70 cm and not more than
0.90 cm in thickness. The edge shall be round and plain. The weight of a Carromman shall not be less than 5.25 grams
and not more than 5.50 grams. Thus there shall be nine white, nine black and one red Carrommen, and they shall be
uniform. The Carrommen shall have a smooth movement in a flat position on the playing surface of the Carrom Board
when struck by a striker of standard specifications.
STRIKER
The Striker shall be smooth and round with a diameter of not more than 4.13 cm and weighing not more than 15.00
gms. A Striker made of any material other than Ivory and metal, with the specifications prescribed above, may be used.
A Striker, with metal fixed and visible to the eyes shall not be allowed. Engraved decent designs on the Striker are
permissible