Lawn mower pulley craftsman M250 engine gasoline

Make the walls 2.4mm thick, or 0.4 nozzle at 6 layers of walls, or thicker. 25% infill to 100%.
Start the print with no support. Stop or pause the print on layer 41-58. Take off the bed, then measure with calipers. Needs to be tight, but of couse not too small. Scale up/down the part in X and Y, in cura slicer. Do math of how big/small the Part needs to be, divided by what the printed part is.
Then set your wall thickness/count, and support, use PETG or better filament, and your ready to slice/print.

Yellow part photos are of the printable part. Black Pulley is what the OEM craftsman pulley looks like.