Heltec ESP32 V4 Enclosure for Repeater

Enclosure for the Heltec V4 (and possibly other 25mm wide ESP32 based LoRA radios). This would normally be used with the non-display version. Two versions, V1 and V2 where V2 is 5mm deeper to allow for a larger battery. V1 version fits a 3000mAh liPo battery but is very tight. I'm working on an SMA version, replacing the N connector. V3 replaces the N connector location with an SMA connector. V4 includes a shroud around the USB-C solar charge port and a 12mm mounting location for a pressure release valve (https://a.co/d/0fN4SQFm) . Version 4 includes SMA and N-type antenna mounting options and modified board mounting to fit more 25mm wide ESP32 boards.

de NJ6N