Groningse Tripklomp (Dutch Clog) - Left and Right pair, and split STLs for full-sized prints in smaller printers

Using Blender, I mirrored the STL @CPomeroy posted to get a left klomp, and then using FreeCAD I split them in half across the width of the model due to the build volume limit of my printer (Elegoo Centauri Carbon). I checked all models in Blender to ensure they were manifold, but Orca Slicer still gave me an error. I let Orca repair the models and they printed fine.

The 28 cm sized model DOES fit my US size 11.5-12 foot! I was making these for a photo op and for decoration so I didn't really focus on durability, but I'm sure they can be printed such that they can be wearable.

I used super glue to join the two halves. Some helpful slicer settings are in the .3mf file, but main ones are using tree supports with a 25° threshold angle, and using an outer brim only with 10mm width and at least 0.15mm brim-object gap.