Summary

another case for the Raspberry pi 2 B...

Wanted to overclock my new Raspberry 2 B and needed a way to actively cool it (also the underside)...

Instructions

The most tricky part was to get the bolts to fit into the base casing nuts.
I used my bq Witbox with a flow rate of 87% for the bolts with a layer thickness of 0,05mm.
Base was printed with 95% flow rate and also 0,05mm layers which took a while ;-). (Sliced with CURA 15.02.1)
I have included a test nut .stl file and would recommend to get the printer settings for bolt and nut right first...

Raspberry Pi 2 B case plus fan mount