Q13 Micro Studio

NOTE: A STEP FILE IS INCLUDED THAT YOU CAN IMPORT INTO A CAD PROGRAM TO HEAL SURFACES AND MODIFY THE MODEL TO FIT DIFFERENT PHONES OR APPLICATIONS.

Designed for use with i-Phone 3 with protective cover and Peavey Amp-kit Pre-Amp Module. It puts the phone in a useful position for interfacing with while recording or jamming on Guitar or Bass.

This is one of my first designs. I printed it out in ABS back in the Fall of 2014, and I still use it on a daily basis here in 2017! (I don’t do ABS anymore. PLA, PET, TPU. That’s about it. And PLA will work JUST FINE for this project!)

A BIG SHOUT-OUT TO THE 3D-PRINTING COMMUNITY FOR YOUR TIPS! IT SAYS A LOT ABOUT YOU GUYS THAT I WAS ABLE TO DESIGN AND PRINT OUT AN AMBITIOUS PROJECT LIKE THIS AFTER BEING IN THE COMMUNITY FOR ONLY 2 OR 3 MONTHS!

This was designed using FUSION 360 in 2014.

This Micr Studio STL was sliced and coded using ReplicatorG employing 2 shells (3 total) using ABS.

FlashForge Creator Pro (Similar to Makerbot Replicator 2)
No Supports or Rafts
Heated Bed 100 Celsius
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
Feedrate 40 mm/s
Travel Feedrate 55

REQUEST: Please help me improve my sharing! STEP files have proven reliable for me to transport file between different CAD platforms. If STEPs are a problem for you, please let me know what other common and relatively generic Cad format works better for you.