Summary

A simple man made out of many different 5cm by 5cm blocks!

photos coming asap so please check back frequently

Made in inventor 2015.
I included the inventor files so you can go in and edit The block man. Add a face, add custom logos, maybe change the joint type or hands, the possibilities are endless! Please post your makes!!!!

Instructions

Many different blocks are going to need to be printed:
8x block
4x right angle block
2x foot
2x hand
1x head block
1x hip block
1x shoulder block

Note: These numbers can be changed to build whatever you want these instructions are to build the basic man shown above

Step 1:
Locate the hip block, shoulder block, and 2 regular blocks.
Insert the peg on top of the hip block into the bottom of a block part. Then put a second standard block onto of the first. Then put the shoulder block onto with its peg sticking upward.

Step 2:
Locate 2 right angle blocks, 2 regular blocks, and the 2 hands. Put the pegs of the right angle blocks into the 2 holes on the side of the shoulder block. Then put the pegs of the regular blocks into the holes of the right angle blocks. Then put the pegs of the hands into the holes of the regular blocks.

Step 3:
Locate 4 regular blocks, 2 right angle blocks, and the 2 foot blocks. Insert the pegs of the right angle blocks into the holes on the side of the hip block. Then build out the legs each 2 blocks long on each side with the regular blocks. Then put the feet on the bottom.

Step 4:
Locate the head. Simply put the head on the peg coming up from the shoulder block. Then your done :)

Additional Notes: For a more secure build parts can be glued together. Print different combinations of parts to build different figures for example animals!

The Block Man