Summary

While traveling through Japan,
we visited the Torii (gate) on the Island Miyajima.
This would be a nice structure in my pond, so I made a scale model.

Information on this historical beauty:
http://visit-miyajima-japan.com/en/assets/images/ootorii1.jpg

Please like before collecting!

Thomas
www.3Daybreaker.blogspot.com

Instructions

Printing gives a small desktop model.
Be advised, this print works also very well if scaled up to 200%.

25% infill, 0.2mm layer

Update 2015-04-29: new files due to an error in the main pillar hole positioning

You need

4x Qzuil
4x Qdak
2x Czuil
4x Qspar
1x all others

some files have multiple objects.
"Zuilen" has all the pillars, with a designed raft, to have them stick better. to be printed red
"Binten" are the big spar and roof support to be printed red
"Black parts"are the roof and pillar tops to be printed black
"Binthalf" is a file in which the spars are cut in half, to get nicer prints. So choose which one to print.

Beware: Binten has a smaller size Cspar, as the subtracted version will not fit, so do not print the single Cspar, but ue the one in BINTEN

Some glueing with cyanic is needed. Be carefull !

Please like before collecting!

Thomas
www.3Daybreaker.blogspot.com

Japan Experience: Great Torii at Miyajima