Summary

Handle for Spatula, Spoon, Lattle, or anything.

Instructions

I printed mine at .25 layer with 3 shells and 10% infill. Scale the print so the handle is 4.5 to 5.5 inches(personal prefference).

When done I filed away some of the inner area at the handle enterance for a tight fight. I dug out enough infill to insert the handl 1.5 to 2 inches. I prepped the spatula handle area to be inserted by drilling a hole throught it around 1/8 inch dia. That hole will be the mechanical link when the glue sets. So keep it near the end.

When everything was fitted I put a fair amount of Gorilla Glue(the kind that expands) in the printed handle hole and made sure all the fitted parts had a coating. I had prewrapped the spatula handle with tape to the insertion depth line. Once together I mount it in a vice(cover with tape) with the handle up. I tape braced in straight and vertical. Then I did not move it for 16 hours. After that I cleaned up the excess glue with a file.

That was a year ago and it's still going strong.