HoverShip MHQ2 FPV Cam Mount

This is a FPV Cam Mount designed to fit in the hexagon slots on the MHQ2 Clean Plate.
I designed it with a 10 degree tilt .
It also has a hole for a 4 inch zip tie so that you can secure it to the Clean Plate.
It was designed to fit a Sony Super HAD 11 CCD 600TVL FPV board camera (32mm x 32mm).
http://www.getfpv.com/lumenier-cs-600-super-600tvl-d-wdr-camera-no-case.html

Enjoy...