Summary

This is a no moving part one way valve. Best suited to high pressure pulsed gasses and liquids such as those produced by the Tesla turbines.

Instructions

This was made on a DaVinci 1.0A. The part was placed diagonally to accommodate its length.
The print was 0.3mm and 30% solid. Using ABS.
It takes about 2 hours and used about 14m of filament.
A cover is required which can be transparent acrylic and needs to be secured/glued to the top to stop leaks.
Inlet and outlet pipes are required, these can be drilled in the recesses at either end and glued in place.

Tesla Valvular - Designed and patented in the 1920's