Caboose's Primitive Quadcopter

Intro

The goal of this project was to create a small, modular, printable quadcopter body. I aimed to keep this as simple as possible.

The quadcopter is made up of a core, and 4 arms. All arms are identical.

Parts List

• Turnigy 2900KV Brushless Outrunner OR Turnigy Park480 Brushless Outrunner 1320kv
• Turnigy Plush 6A ESCs or HobbyKing 6A ESC 0.5A UBEC
• 5030 Props
• 5030R Props
• 1000mAh 2S NanoTech LiPo (or similar)
• KK2 Flight Controller
• 8 x 12mm or 15mm M3 Bolts
• 4 x 40mm M3 Bolts
• 10 x M3 Nuts

Read assembly instructions for more details.

Change List

v2: Spacing change, removal of extra weight. Landing strut available if you don't want to use M3 screws
v1: Initial release