Summary

A collection of parts I have designed for my ZMR250 + Sparky 2 quadcopter

Instructions

A small mount I have made for the KISS BDB + RCTimer/Kiss mini ESC.
ESC - http://www.rctimer.com/product-1280.html

PDB from James - the creator of the Sparky and Sparky 2 controller
https://github.com/TauLabs/TauLabs/wiki/Sparky2
https://github.com/peabody124/misc_hardware/wiki/Kiss-PDB

Combined Xt60 and Cornlight mont (rear)
http://www.banggood.com/Blue-SKY-QAV250-3_9g-XT60-Installtion-Connecter-p-962146.html

http://hobbyking.com/hobbyking/store/__26411__LED_Corn_Light_12V_0_4W_2_LED_Blue_2pcs_.html?strSearch=corn

If you do not want to include XT60 and cornlight, you can use these spacers/LED mounts:
http://www.thingiverse.com/thing:473966

Front mount for two cornlight

4mm spacers (2 on each side of the arms - mounted with the spacer holes closest to the center of the arm - to make space for the motor wires + the needed space for the mini ESC`s

I have included two images to show how to use the arm spacers.

first two spacers, then the arm and then two new spacers

Antenna tube (3,2mm) mount for RX antennas

Flexible antenna mount for the 433Mhz antenna - can be used with other antennas. I have used a M3 rubber vibration mount for this.

XT60 mount without Cornlight mounts

Front FPV camera + FPV TX (200 mW mini).
This is V1 designed for the Sony 25x25 mini CCD camera with plastic housing - you have to do some sanding on the camera housing to make the tilt work + cut the front of the ZMR LiPo plate.

The ZMR frame I used for my mods:
https://grabcad.com/library/zmr250-quadcopter-frame-1

A big THANK YOU to Arkon for sharing the files.

My ZMR 250 mods.