Summary

To start off I want to give props to jamundsen for his hammer, this is a modification to his hammer. I felt the need to make it a new post because I added several mods.

Instructions

The hammer's body and face plates can be printed at without support. The rings were printed with raft to ensure flatness, I used a silver Sharpe to color in the groves of the rings. and used a strip of leather for the wrist strap on the end. I used a light metal pipe i had laying around for the center of the rings. the pipe runs the full length of the hammer and i used sand to fill the hammer up for weight. I drilled two fill holes on top of the hammer to funnel the sand in and used the top cap to close it off. the hammer came out to be 10Lbs.

Thor's Hammer