Summary

A 4-segment box for cutlery. Base raised and contains holes for draining. Intended for 6mm material.

Instructions

The part with 6 holes is the side wall, cut 2 copies.
The part with 16 holes is the base, cut 1 copy.
The part which looks like a space invader is the end wall, cut 2 copies.
The other piece is the internal divider, cut 3 copies.

If your laser cutter and materials are like mine, I recommend painting it before gluing it.

Edit: I found the bottom can fall off from the weight of all the cutlery. Either use a stronger glue than I did, or nails for the base, or keep some of the squares that were cut out of the base and use them as hidden legs to support the bottom from underneath.

Cutlery box