Summary

A pipboy 3000 that fits a Samsung Galaxy S5 with a slot for a 9v battery should anyone decide to add electronics to the lights and such.

Instructions

So after some modification, this pipboy 3000 now fits the Samsung Galaxy S5, and is set up to run on a Z18 (It will take roughly 25-40 hours at medium settings). After cleanup, I will sand the plastic smooth and apply a layer of primer paints before applying model paints to make it look like in the game. The hinge will actually snap in place once printed and need only a 1/8" or smaller metal rod to hinge. This can be 3D printed plastic or be metal. Screw holes are included to screw everything in place, and a couple extra screw holes for aesthetics. More to come, including some tweaks to the 3d model after some flaws I noticed.

EDIT: People have been asking, the height of the tallest piece is about 8.03125 (or 8 1/32) Inches, or about 20.5 CM. If your software messes with the scale of the print scale accordingly to get that overall height. Also, the screw holes are there for aesthetic reasons for the most part, but to screw it together I just used some black screws from recent computer builds. Here's a link: http://amzn.to/1LWi0Rn

Pipboy 3000 for Galaxy S5