Over Hang Degrees Calibration

Update: "I removed the numbers from the object, because slicer programs gave errors. The new ones import without error."

Test your printer's over hang tolerance without support material.
Over hang degrees at 35, 45, 55, 65, 75, & 85.

The smaller one changes degree positions at 0.6 mm increments
The larger is 300%bigger so degrees change at 1.8 mm
Object is divisible easily to be tested at any layer height. Should work great for 0.3 mm, 0.2mm, 0.15 mm, and 0.1 mm layer heights.

smaller object dimensions: 11.5mm x 10 mm x 3.8mm