Diatone Blade 150 7.5° FPV Camera mount

Bracket to hold 600TVL Camera with microphone from banggood to a Diatone Blade 150/180/200 frame with 7.5° tilt (must have the m2 / 3.5mm o/d standoffs in the two front most holes)

http://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html?p=YW18051095305201501X

Update: Found mine was 0.5mm to short but could be printer settings. Also added back cover and plain case.

Print Details:
Printer: Rigidbot
Material: ABS
Slicer: Slic3r
Layer height: 0.1mm (0.3mm first layer)
Raft: No
Infill: 15%
Support: 15% off vertical

Time to print: 1hr 15mins
Finish: Only removed support with knife