Go Pro Hero2 Open-Top Mount

This is an adjustable-tilt light-duty mount for a Go Pro Hero2. The open top/side design makes it easy to insert and remove the camera. A clip is used to hold the open side together and provide a bit of retention force (a small beveled protusion on the inside back of the mount presses against the cam and holds it in due to friction via the clip squeezing the case together slightly).
The lens surround extends about 1mm in front of the lens forwardmost surface for front impact protection - unfortunately this makes the surround visible at the lower edges of the video at the wide FOV setting (I mainly use the narrow setting for my videos which is not an issue).
Tilt retention is via bolt/captured nut.