Summary

Working sand yacht printed on a 200 x 200mm bed

Instructions

Initial sand yacht design.
Starting to print today with a prusa i3.
The sail is challenging as the bed has to flat and sticky enough for a 0.2 mm thick sheet.
The other parts should be straight forward if rotated appropriately for printing
31/7/15
Updated mast step for a better fit to mast. First go at printing sail, wheel and mast step
1/8/15
Updated stl files to improve print ability
Extended the hull for better balance
Axle pins modified to allow free movement
Print two Right wings - one for the left side!
Added hull v1.1 stl just to lighten the body a bit

Sand Yacht