Mini tricopter arms and tail motor tilt

Over the past few weeks I have been tweaking my mini tricopter 3D printed parts. Here are my latest version of the front and tail arms. This awesome tricopter does well over 60 mph with a GoPro!!

The tail arm has a fully integrated motor tilt mount (previously this was zip-tied on but it kept breaking loose on my 4-cell setup). I have well over 50 flights on a 4-cell without issue. Print all parts solid and it will you'll have the same results.

Check out a full write up over on my occasional blog:
https://backyardrc.wordpress.com

Hope you have a blast building your own!!

• Any standard 1806-2208 motors with a 16mm x 19mm bolt pattern fit
• The current tail boom is designed for the Hobbyking's BMS-385DMAX Digital Servo