sj4000 tilt stabilization gimbal for f450 frame
For SJ4000 camera.
Printed with ABS
0 additional shells
10% infill
0.27 layer height
No support required
you need:
1) micro servo (i use TowerPro sg90 from arduino kit)
2) 2mm nail
3) thermal glue, for fixing nail-head in camera case
Connecting servo to apm flight controller:
http://copter.ardupilot.com/wiki/common-servo/#connecting_the_servo_to_an_apm2x
http://copter.ardupilot.com/wiki/common-camera-gimbal/#connecting_the_servos_to_an_apm2